Bring both style and versatility into your home or workplace with our vertical blinds, a modern choice for enhancing any room. These blinds feature slim vertical slats available in a wide variety of colours, finishes, and textures, so you can easily match them to your interior design.
Made for everyday convenience, these blinds allow you to manage light and privacy with ease. The simple tilt function lets you move the slats smoothly, helping you find the right balance between sunshine and shade.
Built from durable materials, these blinds are designed to last. They resist everyday wear and are simple to keep clean. With their practical features and classic look, they are a smart option for both residential and commercial interiors.
€ 42.64
When fitting outside the recess, measure the exact space where you want the blind to cover. To reduce light entering around the edges, allow the blind to extend at least 70mm above the top of the window and 50mm on each side.
The length at the bottom is your choice, but remember to consider obstacles such as radiators or furniture. Always use a metal tape for this process.
If you want the blind fitted inside the window recess, measure the full width and height of the opening. We will make the necessary adjustments so the blind fits neatly.
Measure in three places for both the width and the drop, and record the smallest measurements. Do not make any size reductions yourself—we will take care of that to ensure the blind fits properly.
Again, use a metal tape for precise results.
Before starting, make sure you have all the parts included with your vertical blind.
Place the brackets around 5cm from each end where the headrail will be installed. If more than two brackets are included, space the extra ones evenly along the length. Ensure your fixings are appropriate for the wall or surface you are attaching to.
To install, hook the back of the headrail into the bracket, rotate it into position, and tighten the small screw at the front to lock it in place.
First, mark the distance needed to clear any obstructions such as window handles that project into the recess. Position the brackets about 10cm from each end of where the headrail will sit, making sure the handles can move freely. If more than two brackets are supplied, fix the extra ones evenly across the length. Again, check that the fixings are suitable for the mounting surface.
Tilt and hook the headrail into the bracket, then rotate until it clicks securely. To release the headrail, press the bracket catch at the marked point.
