Add a warm touch of elegance to your home with the Nora Gold Roman Blind, offered only by Blinds Artist. With its rich golden colour and fine textured fabric, this blind brings a gentle sense of luxury and charm, making it perfect for any room where you want to create a stylish and welcoming atmosphere.
The Nora Gold shade gives a soft, glowing finish that blends beautifully with creams, rich neutral tones, dark blues, and natural furnishings. Whether you are decorating a classic bedroom, a chic living room, or a hallway that makes an impression, this blind will add warmth, depth, and timeless character to your décor.
Made from high-quality fabric, the Nora Gold Roman Blind is designed to be both attractive and dependable. The neat Roman fold design creates smooth stacked pleats when lifted and a soft, elegant drape when lowered. The easy-to-use lift system allows smooth control over privacy and light, making this blind both practical and stylish.
€ 126.79
Make sure not to confuse the width with the height when you are recording measurements, as mixing them up can lead to blinds that do not fit properly. If you are measuring more than one window, do not assume they are all the same size. Instead, measure each one carefully and write down the exact size, as even small differences can affect how the blinds fit.
Measure the full size of the area you want the blind to cover. To reduce light gaps, it is recommended that the blind overlaps the recess by at least 70mm at the top and 50mm on both sides. The overlap at the bottom is up to your choice, but remember to allow for obstacles such as radiators or window sills. Always use a steel measuring tape, as cloth tapes can stretch and give inaccurate results.
If you want your blind to sit inside the window recess, measure the total width and height of the recess opening. We will then make the needed adjustments to ensure the blind fits correctly.
Take three measurements each for the width and the drop, and always use the smallest measurement. Do not make any reductions yourself, as we will do that to ensure a perfect fit. Again, always use a metal tape to avoid errors.
When you are ready to install your vertical blind, make sure you have the following items included:
For face fixing, position the brackets about 5cm from each end of the headrail location. If you have more than two brackets, space the extra ones evenly along the blind’s length. Make sure the fixings you use are suitable for the type of wall or surface.
To attach, hook the back of the headrail into the bracket and rotate it into place. Then, tighten the short screw at the front of the bracket to secure the headrail firmly.
For top fixing, first measure and mark the points, making sure to allow space for handles or other obstructions that stick out into the recess. Place the brackets around 10cm from each end of where the headrail will sit, as this will clear the window handles. If you have more than two brackets, position the extras evenly across the width. Check that your fixings are suitable for the surface.
Tilt the headrail into the bracket and rotate it until you hear a click, which confirms it is locked in place. To remove the headrail, press the release point on the bracket.
