Our Day and Night Electric Blinds provide a complete solution for controlling light in your room. With the remote control, you can adjust the horizontal panels to line up or separate at any position you like. This allows you to have full control over how much natural light enters your space.
Your delivery will be carefully hand-packed and will include the following:
€ 120.22
Day and Night blinds should be measured as follows:
To fit the blind inside the window recess:
You must measure the full width and height of the recessed area, from wall to wall.
Inside recess measurement:
Guide for inside recess fitting:
Use a steel tape measure to get accurate measurements in centimetres to the nearest millimetre. Measure in three places for both width and height, and use the smallest measurement when placing your order. The factory will make any necessary deductions for blinds that are specified for a recess to ensure they fit perfectly. Take care when measuring around obstacles such as tiles, handles, or rails to ensure the blind is positioned correctly.
To fit the blind outside the window recess:
The blind will be made exactly to the measurements you provide, with no deductions applied.
Guide for outside recess fitting:
Decide on the area you want the blind to cover. To reduce sunlight glare, it is recommended to allow an overlap of 6cm on each side and 7cm at the top of the window. Measure the full width of the area to be covered. Take care to allow for obstacles such as tiles or rails to ensure the blind is positioned correctly. You may also choose whether to add an overlap at the bottom of the window.
The blind can be installed according to the measurements provided. Always ensure that the positioning is precise and that any obstructions are accounted for before fitting.
