Day and Night Blinds – Inside Recess

To fit a blind inside a window recess, you need to measure the full width and height of the recessed area from wall to wall.

Inside Recess Measurement

• Take three width measurements: top, middle, and bottom of the window recess
• Take three height measurements: left, centre, and right of the window

Guide for Inside Recess Fitting

• Use a steel tape measure to get exact measurements in centimetres, to the nearest millimetre
• Measure in three specific places for both width and height and use the smallest measurement when ordering
• The factory will make any necessary deductions for recess-specified blinds to ensure a perfect fit
• Take care around obstacles such as tiles, handles, or rails to ensure measurements are accurate

Outside Recess Fitting

If you want the blind to fit outside the window recess, it will be made exactly to the measurements you provide, with no deductions.

Guide for Outside Recess Fitting

• Measure the area you want the blind to cover. To reduce sunlight effectively, we recommend an overlap of 6 cm on each side and 7 cm at the top of the window
• Be cautious of obstacles such as tiles, rails, or handles when measuring to ensure the position is correct
• You may choose to have an overlap at the bottom of the window if you prefer

Once measured correctly, the blind can be installed. Make sure all fittings are secure and the blind moves smoothly using the remote control.