Day and Night Blinds – Inside Recess

If you want to fit the blind inside the window recess, you will need to measure the full width and height of the recessed area, from wall to wall.

Inside Recess Measurements:

• Measure the width at three points: top, middle, and bottom of the window
• Measure the height at three points: left, centre, and right

Guide for Inside Recess Fitting:

• Use a steel tape measure to get exact measurements in centimetres to the nearest millimetre
• Take measurements in three places for both width and height and use the smallest measurement when ordering
• The factory will make any necessary adjustments for recess-specified blinds to ensure a perfect fit
• Be careful when measuring around obstacles such as tiles, handles, and rails to ensure the blind is positioned accurately

Day and Night Blinds – Outside Recess

If you are fitting the blind outside the window recess, we will make the blind to the exact measurements you provide, with no deductions.

Guide for Outside Recess Fitting:

• Measure the full width of the area you want the blind to cover. To block sunlight effectively, we recommend an overlap of 6 cm on each side and 7 cm at the top of the window
• Take care when measuring to avoid obstacles like tiles and rails, ensuring the blind will be placed correctly
• You may choose to overlap the bottom of the window if you prefer, but this is optional

Once you have your measurements, install the blind using the included fittings. Follow the instructions carefully so that the blind is secure and operates smoothly. After installation, you can control your blind easily using the remote control, adjusting the panels to suit your preferred level of light.