Inside Recess Fitting

To fit the blind inside a window recess, you need to measure the full width and height of the recessed area, from wall to wall.

Inside Recess Measurements:

• Measure the width in three places: at the top, middle, and bottom of the window
• Measure the height in three places: on the left, centre, and right

Guide for Inside Recess Fitting:

• Use a steel tape measure for exact measurements in centimetres, down to the nearest millimetre
• Take measurements in three points for both width and height and always use the smallest measurement when ordering
• The factory will make any necessary deductions for recess-specified blinds to ensure a perfect fit
• Be careful when measuring around obstacles such as tiles, handles, and rails to make sure the blind fits accurately

Outside Recess Fitting

If you prefer to fit the blind outside the window recess, we will make the blind exactly to the measurements you provide, with no deductions.

Guide for Outside Recess Fitting:

• Measure the full area you want the blind to cover. To block sunlight effectively, we recommend an overlap of 6 cm on each side and 7 cm at the top
• Take care when measuring around obstacles such as tiles and rails to make sure the blind will fit correctly
• You may choose to overlap the bottom of the window if you wish, but this is optional

Once you have your measurements, the blind can be installed using the included fittings. Follow the instructions carefully to ensure the blind is secure and works smoothly. After installation, you can use the remote control to adjust the panels and control the light in your room easily.