Day and Night Blinds – Fitting Inside the Window Recess

To fit the blind inside a window recess, you must measure the full width and height of the recessed area from wall to wall.

Inside Recess Measurement

• Measure across the window recess in three places: top, middle, and bottom
• Measure vertically in three places: left, centre, and right

Guide for Inside Recess Fitting

• Use a steel tape measure to take precise measurements in centimetres to the nearest millimetre
• Measure in three specific points for both width and height, and always use the smallest measurement when placing your order
• The factory will make any necessary adjustments for recess-specified blinds to ensure a perfect fit
• Be careful when measuring around obstacles such as tiles, handles, or rails to make sure the measurements are accurate

Fitting Outside the Window Recess

If you prefer the blind to fit outside the window recess, it will be made exactly to the measurements you provide, with no deductions.

Guide for Outside Recess Fitting

• Measure the area you want the blind to cover. To reduce sunlight effectively, we suggest an overlap of 6 cm on each side and 7 cm at the top
• Take care when measuring near obstacles such as tiles or rails to ensure the positioning is correct
• You can also choose to have an overlap at the bottom of the window if you wish

After confirming the measurements, the blind can be installed. Make sure all fittings are secure, and operate the blind using the remote control to check smooth movement.