GRAVITY GREY MOTORISED ROLLER BLIND

Motorised blinds are our premium range, giving your windows an automatic, electric feel. Both roller blinds and day and night blinds are fitted with a motorised control system, allowing you to open and close them with just one click using the remote control. We offer a wide range of blinds, available in many colours.

Benefits of Motorised Blinds

Simple and effortless to use
Completely cord-free, making them safe for children (no hanging cords or chains)
Available in all fabrics suitable for homes or offices
Choice of Somfy or Cruze electric motor
Ideal for windows that are high or hard to reach
Made to measure to fit your exact window size
Rechargeable battery pack – one full charge provides around 11 months of use
Remote control included – each blind comes with one for raising and lowering
Excellent for bedrooms – blackout options maximise light reduction

Motorised blinds are very easy to operate, install, and set up. They are powered using high-quality Somfy motors. There are no attached cables; only a remote is needed to control the blind. The remote is rechargeable and the blinds can also be controlled through a smartphone app or a smart home system.

Note: Motorised blinds may not be suitable for kitchens or bathrooms.

Important: The colour of the blinds may appear different on screens depending on your device settings.

€ 100^.51

Enter your Measurements

Millimeters Centimeters Inches

Dimensions: 0x0 mm

Width (mm)

Height (mm)

SELECT YOUR HEADRAIL

RECESS / EXACT

CONTROL POSITION

BUNCH

BRACKET TYPE

BOTTOM WEIGHT / CHAIN

Total Price: € 100^.51

Inside Recess Fit

To fit the blind inside a window recess, measure the full width and height of the recessed area from wall to wall.

Take three width measurements across the top, middle, and bottom of the window recess.
Take three height measurements down the left, centre, and right of the recess.
Use a steel tape measure and record measurements in centimetres to the nearest millimetre.
Use the smallest measurement when ordering to ensure the blind fits perfectly.
The factory will make any necessary deductions for recess-specified blinds.
Be careful when measuring around obstacles such as tiles, handles, and rails to ensure accuracy.

Outside Recess Fit

For blinds that fit outside the window recess, we will make the blind exactly to your specified measurements with no deductions.

Measure the area you want the blind to cover. To reduce sunlight, we recommend overlapping by 6 cm on each side and 7 cm at the top.
Be careful around obstacles like tiles and rails.
Overlap at the bottom of the window is optional.

Choose your preferred mounting type:

Top Mount: Attaches to an overhead surface such as the top of the window recess or ceiling.
Face Mount: Attaches to the face of the window frame outside the recess.

Fitting Instructions

Position the brackets so the blind operates freely without hitting handles or window frames.
Loosely place both brackets on the blind and hold it in position to centre it.
Place the control side bracket on the same side as the chain mechanism. Ensure it is level to prevent incorrect operation. Drill holes and fix with raw plugs if needed.
Insert one end of the blind into the mounted bracket. Place the other bracket at the opposite end, mark its position, check it is level, drill, and fix it in place.

Mounting the Blind

Insert the pin end of the blind into the pin-side bracket. The spring mechanism allows easy mounting and removal.
Fit the control side mechanism into the control-side bracket. The central lug should point downwards and hook into the bracket securely.

Operating the Blind

Once installed, use the chain to raise and lower the blind.

P-Clip Installation

Install the P-clip as far as possible from the control mechanism to keep the chain tight.
Ensure the control chain sits inside the P-clip and is under constant tension. Screw the tensioning device to the wall to maintain proper chain operation.