HAVANA GREY MOTORISED ROLLER BLIND

Motorised blinds are our premium range, designed to give your windows a modern, electric feel. Both roller blinds and day-and-night blinds come with a motorised control system, allowing you to open and close them with just one click on the remote control. We offer a wide variety of blinds in a good range of colours to suit any home or office.

Benefits of Motorised Blinds

Very easy to operate
Completely cord-free and safe for children, with no hanging cords or chains
Available in all fabrics suitable for home or office use
Choice of Somfy or Cruze electric motors
Ideal for high or hard-to-reach windows
Made to measure for your exact window size
Rechargeable battery pack gives approximately 11 months of use per charge
Remote control included, allowing you to raise or lower each blind
Excellent for bedrooms, with blackout options to reduce light

Motorised blinds are simple to set up, operate, and install. They are powered using high-quality Somfy motors. No cables are required, only a rechargeable remote. They can also be controlled via an app or integrated with a smart home system.

Important Notes

Motorised blinds may not be suitable for kitchens or bathrooms.
The colour of the blinds may appear differently on screens depending on your device settings.

€ 100^.51

Enter your Measurements

Millimeters Centimeters Inches

Dimensions: 0x0 mm

Width (mm)

Height (mm)

SELECT YOUR HEADRAIL

RECESS / EXACT

CONTROL POSITION

BUNCH

BRACKET TYPE

BOTTOM WEIGHT / CHAIN

Total Price: € 100^.51

Tools You Will Need

Steel tape measure
Pencil to mark and note measurements
Worksheet to record findings
Ladder if windows are tall

Tips for Accurate Measurement

Do not mix up height and width measurements, as this could result in a blind that does not fit properly.
If measuring multiple windows, do not assume they are the same size. Measure each one individually, as small differences can affect how the blinds fit.

Outside Recess Measurement

Measure the exact area where you want the blind to overlap. To reduce light leakage, we recommend a 70mm overlap at the top and 50mm on each side. Overlap at the bottom is optional but consider obstacles like radiators. Always use a metal tape measure, as cloth tapes can stretch and give inaccurate readings.

Inside Recess Measurement

If you want your blind to fit inside the window recess, measure the full width and height of the recess (the “hole” size). We will make the necessary deductions to ensure a perfect fit.

Measure in three places for both width and drop, and use the smallest measurement.
Do not make deductions yourself; the factory will adjust to ensure the blind fits properly.
Use a metal tape measure for accuracy.

Items Supplied with Your Blind

Face Fixing

Position the brackets about 5cm from the ends of the headrail. If more than two brackets are supplied, space the additional brackets evenly along the length of the blind. Ensure the fixings are suitable for the wall or surface you are using.

Hook the back of the headrail into the brackets and rotate the headrail into position. Secure it by tightening the short screw at the front of each bracket.

Top Fixing

Measure and mark the area to allow for obstacles such as window handles. Position the brackets about 10cm from the ends of the headrail so that the blind clears any handles. If more than two brackets are supplied, space the additional brackets evenly across the headrail. Ensure the fixings are suitable for your wall or surface.

Tilt and hook the headrail into the brackets, then rotate it into place until it clicks. To remove the headrail, press the bracket at the designated point.