Please provide the wall-to-wall measurements for both the width and the drop of your blinds. The warehouse will then make the required deductions for you. We will not be able to send your order until we have received the correct measurements.
Our roller blind has a natural weave design that is ideal for adding style to your home.
Important: The shade of the blind may look different depending on your device or screen settings.
Our roller blinds are carefully packed with the required fittings. Inside your package, you will find:
€ 46.69
Roller Only Measurement
If you are fitting the blind inside the window recess, measure the complete width and height of the recessed area from wall to wall.
Inside Recess Measurement
Measure across the inside of the window recess in three places: at the top, middle, and bottom.
Measure the height in three places as well: left, centre, and right.
Guide for Inside Recess Fitting
Use a steel tape measure to ensure exact measurements in centimetres, down to the nearest millimetre.
Take three measurements for both width and height, then use the smallest one when placing your order.
The factory will make any necessary deductions for recess blinds to ensure they fit correctly.
Be careful when measuring around obstacles such as handles, tiles, or rails, making sure your chosen position is accurate.
Outside Recess Measurement
For blinds fitted outside the recess, the blind will be made exactly to the measurements you provide, with no deductions.
Guide for Outside Recess Fitting
Measure the full area you want the blind to cover. To reduce sunlight, we recommend adding an overlap of 6 cm on each side and 7 cm above the window.
Take care when measuring around obstacles such as tiles or rails so that the position is correct.
It is your decision whether you want the blind to extend below the bottom of the window.
Please choose which fixing method you prefer:
Top mount / Face mount
You must position the brackets so the blind can move freely without hitting any window handles or frames. Hold the brackets loosely in place with the blind to check where it should sit, as this makes it easier to centre.
Fix the control side bracket on the same side as the chain mechanism. Mark the spot for the first bracket, making sure it is level and not tilted, as this will affect the blind’s function. Drill holes and fix the bracket securely, using raw plugs if fixing into a wall.
Insert one end of the blind into the mounted bracket. Position the second bracket on the other side of the blind and mark its spot, ensuring it is level with the first. Drill holes and fix the bracket firmly, using raw plugs where needed.
Place the pin end of the blind into the pin bracket. The pin end has a spring action to make fitting and removing easier. Then, slot the control mechanism into the control side bracket. The small lug on the mechanism should point downwards and lock into the cross-shaped slot on the bracket to hold it in place.
After the blind has been installed, use the side chain to raise and lower it.
The safety device should be fixed as far away from the chain mechanism as possible, to keep the chain from hanging loosely.
Make sure the control chain passes through the p-clip and remains tight. The p-clip should be fixed at the bottom of the chain loop while still allowing smooth movement. Screw the tension device firmly to the wall, making sure the chain is always tight and under safe tension.
