California Sky – Blue Replacement Slats

Fresh, bright, and full of summer charm, this California Sky Blue vertical blind has a rich, soft colour that will add a touch of luxury to any room. Its uplifting shade brings a warm and welcoming feel, making your home look and feel more refined.

The Finer Details

Made completely to measure
Fabric is 100% polyester
Maximum drop: 4000mm
Minimum drop: 254mm
Louvres measure 89mm wide and are made from 100% polyester fabric
Supplied with white top hangers as standard
Bottom weights and stabilising chains available in a choice of colours (white supplied by default)

Product Imagery

Colours can sometimes appear different depending on the monitor and settings used. To be confident in your choice, we recommend ordering a free fabric sample before placing your order.

Returns

As these blinds are made to custom measurements, they can only be returned if a fault is found. Please double-check your measurements carefully before placing your order.

€ 1^.13

Enter your Measurements

Millimeters Centimeters Inches

Dimensions: 0x0 mm

Width (mm)

Height (mm)

SELECT YOUR HEADRAIL

RECESS / EXACT

CONTROL POSITION

BUNCH

BRACKET TYPE

BOTTOM WEIGHT / CHAIN

Total Price: € 1^.13

When measuring for slats only, the given size will represent the fabric length laid flat. The most common slat width is 89mm, which is the standard size used for most fabrics we provide.

When ordering, make sure your chosen fabric is the right width. Take measurements to the nearest centimetre, then subtract 1cm from both the height and the width. Do not make any further deductions yourself.

If Slats Are Not Already Available, Follow These Steps:

Measure the space at your window for the size you need.
Measure from the track opening down to where you want the slat to finish.
Ensure the bottom of the slat ends about 13mm above any obstruction such as a sill or radiator.

Counting and Working Out the Number of Slats Required:

Count the existing slats or the number of trucks on your headrail.
Enter the total number you need when placing your order.

Check that you have all of the following items provided with your vertical blind before starting:

Face Fix

Place the brackets about 5cm in from each end of the headrail position. If more than two brackets are included, space the extras evenly along the length of the blind. Always ensure the fixings are suitable for the wall or surface where they will be attached.

To install, hook the back of the headrail into the bracket and rotate it until it locks in place. Tighten the small screw at the front of the bracket to secure it firmly.

Top Fix

Mark and measure carefully, allowing space for obstructions such as handles that extend into the recess. Place the brackets roughly 10cm in from the ends of the headrail, which ensures clearance for the window handle. If more than two brackets are provided, space the extras evenly across the full length of the blind. Always check that fixings are right for the surface where you are fitting them.

Tilt the headrail into the bracket and rotate until it clicks securely into position. To remove the headrail, press the release point on the bracket and gently pull the rail free.