Feather Weave Chantilly – Pink Replacement Slats

In a soft pink shade that brings to mind the gentle colours of spring flowers, this vertical blind is ideal for a bedroom, lounge, or a child’s room. It creates a peaceful and calming atmosphere.

The Finer Details

Custom made to measure
Made from 100% polyester
Maximum drop: 4000mm
Minimum drop: 254mm
Louvres made from 89mm wide 100% polyester fabric
Supplied with white top hangers as standard
Bottom weights and stabilising chains are available in a choice of colours (white is provided as the standard option)

Product Imagery

Please note that colours and shading may look slightly different on screen due to variations in monitor types and settings. To make sure you are happy with the fabric, it is recommended to order a free sample before placing an order.

Returns

As these blinds are custom-made, they can only be returned if they are faulty. Please check your measurements carefully before ordering to ensure accuracy.

€ 1^.09

Enter your Measurements

Millimeters Centimeters Inches

Dimensions: 0x0 mm

Width (mm)

Height (mm)

SELECT YOUR HEADRAIL

RECESS / EXACT

CONTROL POSITION

BUNCH

BRACKET TYPE

BOTTOM WEIGHT / CHAIN

Total Price: € 1^.09

When measuring for slats only, the size will reflect the length of the fabric as it lies flat. The standard width of each slat is usually 89mm, which is the size available for most fabrics offered.

When placing your order, confirm that your chosen fabric is the correct width. Measure to the nearest centimetre and deduct 1cm from both the height and width measurements. Do not make any deductions yourself.

If No Slat Is Available – Please Follow These Steps:

Measure the space required at your window.
Measure from the track opening down to where you want the slat to finish.
The slat should end about 13mm above any obstruction such as a radiator or window sill.
Count the existing slats or the number of trucks on your headrail.
When ordering, enter the total quantity required.

Please make sure you have all the parts that come with your vertical blind.

Additional equipment required during installation:

Face Fix

Position the brackets around 5cm from each end where the headrail will be fitted. If more than two brackets are provided, space the extras evenly along the length of the blind. Check that the fixings you use are suitable for the wall or surface you are attaching them to.

To fit, hook the back of the headrail into the bracket and rotate it into place. Secure the headrail by tightening the short screw at the front of the bracket.

Top Fix

Measure and mark the area carefully, making allowances for any obstructions such as window handles that extend into the recess. Place the brackets about 10cm from each end where the headrail will be installed, which should allow clearance for the window handle. If more than two brackets are provided, space the extras evenly across the blind. Ensure that the fixings are suitable for the wall or ceiling surface.

To fit, tilt and hook the headrail into the bracket at the marked point, then rotate it into place until it clicks securely. To release the headrail, press the bracket at the release point.