Dimout Rome Grey – Motorised Day and Night Blind

Dimout Rome Grey – Motorised Day and Night Blind

Our Day and Night electric blinds provide the perfect solution for controlling light in any room. Using the remote control supplied, you can adjust the horizontal panels to either line up or move apart at any point you choose. This gives you complete control over how much natural light enters your space.

Your delivery will be carefully hand packed and will include:

  • Your made-to-measure blind
  • All the necessary fixtures and fittings for installation
  • One remote control per blind
  • One charger per order

 108.77



Total Price:  108.77

Day and Night Blinds – Inside Recess Only

To fit a blind inside a window recess, you need to measure the full width and height of the recessed area from wall to wall.

Inside Recess Measurement

  • Take three width measurements across the inside of the window recess: at the top, in the middle, and at the bottom.
  • Take three height measurements: on the left, in the centre, and on the right.

Guide for Inside Recess Fitting

  • Use a steel tape measure to take accurate measurements in centimetres, recorded to the nearest millimetre.
  • Measure in three places for both width and height, and always use the smallest measurement when placing your order.
  • The factory will make any necessary deductions for “recess specified blinds” to ensure a perfect fit.
  • Be careful when measuring, as obstacles such as tiles, handles, or rails can affect accuracy.

To Fit the Blind Outside the Window Recess

If the blind is to be fitted outside the window recess, it will be made exactly to the measurements you provide, with no deductions.

Guide for Outside Recess Fitting

  • Measure the full area you want the blind to cover. To block sunlight effectively, we recommend an overlap of 6 cm on each side and 7 cm at the top of the window.
  • Take care when measuring to avoid obstacles such as tiles or rails, ensuring the blind is positioned correctly.
  • You may also choose to have an overlap at the bottom of the window if you prefer.

The blind can then be installed according to the measurements you have taken. Make sure all fixtures are securely fitted and that the blind operates smoothly using the remote control.