Discover the versatility and style of vertical blinds – a modern way to enhance the look of any room. These blinds feature slim vertical slats available in a wide choice of materials, colours, and finishes, allowing you to match your window coverings perfectly with your interior décor.
Made for convenience, vertical blinds give you precise control over both light and privacy. With a simple tilt control, you can easily adjust the angle of the slats to achieve just the right balance between natural sunlight and shade.
Strong and low maintenance, these blinds are built from durable materials to ensure long-lasting use and resistance to everyday wear. Add a touch of sophistication to your home or workplace with the classic look and practical benefits of vertical blinds – a stylish option for both residential and commercial spaces.
Key Features
€ 42.75
Tools you will need to measure vertical blinds:
Tips for accurate measuring:
Outside Recess
Measure the total area that you want the blind to cover. To reduce light gaps, it is best if the blind extends at least 70mm above the recess and 50mm to each side.
The overlap at the bottom is your choice, but do check for obstructions such as radiators.
Always use a steel tape measure, as fabric tape measures can stretch or bend and give inaccurate readings.
Inside Recess
If you want your blind fitted within the window recess, measure the full width and height of the recess (the “hole” size). We will make the necessary allowances for the best fit.
Measure in three places across the width and height, and note the smallest measurement for each.
Do not make your own deductions – we will handle that to ensure accuracy.
Always use a steel tape measure for reliable results.
Before fitting your vertical blinds, make sure you have the following parts included with your order:
Additional tools and fittings you will need:
Face Fix
Position the brackets about 5cm from each end of where the headrail will sit. If more than two brackets are supplied, space the extras evenly along the length of the blind. Make sure the fixings are appropriate for the wall or surface you are attaching them to.
To install, hook the back of the headrail into the bracket and rotate it forward into position. Secure it by tightening the small screw located at the front of the bracket.
Top Fix
Mark the positions, ensuring that you allow for any obstacles such as window handles that extend into the recess. Place the brackets around 10cm from each end of where the headrail will be fixed, leaving clearance for the handle. If you have more than two brackets, space them out evenly across the blind. Again, check that the fixings are suitable for the surface.
To fit, tilt the headrail into the bracket until it clicks into place. To remove, press the release point on the bracket and the headrail will detach.
