Day and Night Blinds – Inside Window Recess

To fit the blind inside a window recess, you must measure the full width and height of the recessed area, from wall to wall.

Guide for Inside Recess Measuring

• Take three width measurements across the window recess: at the top, middle, and bottom.
• Take three height measurements: at the left, centre, and right.
• Use a steel tape measure for accurate results in centimetres, measured to the nearest millimetre.
• Measure in three places for both width and height and use the smallest measurement when ordering.
• The factory will make any necessary deductions for blinds made to fit a recess to ensure a precise fit.
• Be careful of obstacles such as tiles, handles, or rails so that the blind fits correctly.

Day and Night Blinds – Outside Window Recess

If the blind is to be fitted outside the window recess, it will be made exactly to the measurements you provide, with no deductions.

Guide for Outside Recess Measuring

• Measure the area you want the blind to cover. To reduce sunlight effectively, we suggest an overlap of 6 cm on each side and 7 cm above the window.
• Take the exact width of the area you want covered.
• Be cautious of obstacles such as tiles or rails to make sure the blind sits correctly.
• You can decide whether to have an overlap at the bottom of the window.

Motorised Day and Night Blinds are simple to install if you follow the instructions carefully. Make sure the wall or window surface is clean, level, and free from obstacles. Correct fitting ensures the blind operates smoothly and looks neat.