Our motorised blinds are the top range of blinds and provide an electric touch to your windows. Both roller blinds and Day and Night blinds come with a motorised control system, allowing you to open or close the blinds with just one click using the remote control. We offer a wide selection of blinds with a great variety of colours to choose from.
Motorised blinds are simple to operate, set up, and install. They are powered using high-quality Somfy motors. There are no cables attached; you only need the remote to operate the blinds. The remote is rechargeable, and the blinds can also be controlled using an app or a smart home system.
Note: Motorised blinds may not be suitable for kitchens or bathrooms.
Important: The colour of the blinds may appear different depending on the screen or device you are using.
€ 97.32
Day and Night blinds require special measurements:
To fit the blind inside the window recess:
Measure the full width and height of the recessed area from wall to wall.
Inside recess measurement:
Guide for inside recess fitting:
Use a steel tape measure to get precise measurements in centimetres to the nearest millimetre. Measure width and height in three places and use the smallest measurement when ordering. The factory will make any necessary deductions for recess-specified blinds to ensure a perfect fit. Be careful when measuring around obstacles such as tiles, handles, or rails, to ensure the blind fits accurately.
To fit the blind outside the window recess:
We will make the blind exactly to the measurements you provide, with no deductions.
Guide for outside recess fitting:
Decide on the area you want the blind to cover. To reduce sunlight glare, we recommend an overlap of 6cm on each side and 7cm at the top of the window. Measure the width of the area carefully. Take care when measuring around obstacles such as tiles or rails to ensure accurate placement. You may also choose to add an overlap at the bottom of the window.
Install the blind according to your measurements, taking care to avoid any obstructions and ensuring the positioning is accurate.
