This lighter brown and grey blind has a soft pale shade that helps create a cosy and natural atmosphere in your home. Its gentle tones bring warmth while blending easily with different styles of décor.
€ 1.10
When ordering slats only, the measurement refers to the fabric length laid flat. The width of the slat is generally 89mm, which is the most common size and the one offered for most fabrics.
When placing your order, always make sure the fabric selected is the correct width. Measure to the nearest centimetre, then reduce both the height and width by 1cm. Do not make any other deductions yourself.
Check that you have the following parts included with your vertical blind:
Extra tools and equipment needed for fitting:
Position the brackets about 5cm in from each end of the headrail location. If more than two brackets are included, space the extra ones evenly along the full length of the blind. Always make sure the fixings are suitable for the wall or surface where they will be attached.
To install, hook the back of the headrail into the bracket, then rotate it into place. Secure it by tightening the small screw located at the front of the bracket.
Measure and mark the position, allowing space for handles or other parts that may stick into the recess. Place the brackets about 10cm from each end of the headrail so that the blind clears the window handle. If more than two brackets are supplied, position the extras evenly across the headrail. Make sure all fixings are suitable for the surface.
To fit, tilt the headrail and hook it into the bracket at the marked point. Rotate until it clicks securely into place. To remove, push the bracket at the same point.
